SimScale simulation projects by jbj4224 | Page 1

jbj4224's profile

In this exercise, you will complete a laminar pipe flow analysis

Testing Hex Dominant auto meshing function

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

CFD of a RB12 rear wing I have been reverse engineering in Onshape.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This  project analyzes the aerodynamics of a spoiler

CFD of an FW-31 rear wing I have been reverse engineering in Onshape.

I got this wing design from Youtube by a guy named Wolfgang  
Walden. I am using it to learn how to interpret CFD data.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

jbj4224's profile