SimScale simulation projects by jballen | Page 1

jballen's profile

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used. - Copy

Accurate conjugate heat transfer model of a heatsink

The presented project is an analysis of the thermal performance of a heat sink connected to chip. The chip acts as a power source generating 30W of heat. Using a conjugate heat transfer analysis allows for simulation of heat transfer between the solids via conduction and the dissipation of heat into the ambient fluid via convection. The components are cooled passively and buoyancy effects  drive the flow in the surrounding air.

The objective of this project is to evaluate the max temperature of the chip during operation and therefore a steady state analysis was carried out. - Copy

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This geometry serves as a starting point for the CHT tutorial of a PCB-board that is cooled by forced convection. See the comments section for the links to the corresponding forum topic. - Copy

Public Profile

jballen's profile