SimScale simulation projects by jabdala | Page 1

jabdala's profile

Flow in annulus fixed-rotating cylinder pair

This project simulates Couette flow - flow in annulus fixed-rotating cylinder pair.

Heating elements are the most versatile of all-electric heating elements and are widely used as the main source of electric heat for the domestic, commercial, and industrial. Tubular elements can be immersed in liquids, cast into metals, clamped, placed in vessels and
ducts to heat gases or simply used as radiant heaters for a variety of processes.

Tutorial for meshing of valve geometry with Snappy Hex Mesh

Low Voltage Bus-bar Support for Switchboard

In this project a transient thermal analysis of a perforated plate with is demonstrated.

In this project a static analysis of an I-beam under remote force is demonstrated.

Drone Workshop S2 Drone arm analysis - Bolts Study

Standoff Insulators - Low Voltage  Busbar Support for Switchboard

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

Public Profile

jabdala's profile