SimScale simulation projects by imestre | Page 1

imestre's profile

Second CHT analysis considering water as fluid and applying recirculation with a pump (modelled as a momentum source).

First CHT analysis considering water as fluid and applying recirculation with a pump (modelled as a momentum source).

The goal is to compare the temperature distribution over water considering it a fluid and a solid (neglecting movement over the fluid due to changes in density)

Transient thermal analysis focused on simulate the cooling velocity and temperature distribution in a volume of water after 30 minutes under certain thermal loads. The goal is comparing the variables values of cooling velocity and temperature with the obtained in the proyect Week 13: Cooling  system aprox. 2

Transient thermal analysis focused on simulate the cooling velocity and temperature distribution in a volume of water after 30 minutes under certain thermal loads. The goal is comparing the variables values of cooling velocity and temperature with the obtained in the proyect Week 14: Cooling system aprox. 2

Transient thermal analysis focused on simulate the cooling velocity and temperature distribution in a volume of water after 30 minutes under certain thermal loads. The goal is comparing the variables values of cooling velocity and temperature with the obtained in the proyect Week 14: Cooling system aprox. 1

Transient thermal analysis focused on simulate the cooling velocity and temperature distribution in a volume of water after 30 minutes under certain thermal loads. The goal is comparing the variables values of cooling velocity and temperature with the obtained in the proyect Week 13: Cooling system aprox. 4

Transient thermal analysis focused on simulate the cooling velocity and temperature distribution in a volume of water after 30 minutes under certain thermal loads. The goal is comparing the variables values of cooling velocity and temperature with the obtained in the proyect Week 13: Cooling system aprox. 3

Transient thermal analysis focused on simulate the cooling velocity and temperature distribution in a volume of water after 30 minutes under certain thermal loads. The goal is comparing the variables values of cooling velocity and temperature with the obtained in the proyect Week 13: Cooling system aprox. 1

First analysis of a system used to cooling water. The aim is to create a more simple geometry (therefore a fast compute) with similir results for using in a more complex model.

Third analysis of a system used to cooling water. The aim is to create a more simple geometry (therefore a fast compute) with similir results for using in a more complex model.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

Determine the temperature distribution in a piece of equipment with certain thermal loads and heat pumps.

Tutorial for the flow of fluid through a pipe junction

Public Profile

imestre's profile