SimScale simulation projects by hugocp | Page 1

hugocp's profile

The accessory operates by the Venturi principle, which means: the main stream would have water (motive fluid) and at the low pressure zone, created by the narrow flow area, the secondary fluid would be drawn in. Also a defined concentration mixture is obtained at Venturi injector outlet by controlling the amount of soluble oil using a valve at the suction line.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

hugocp's profile