SimScale simulation projects by heshamzahw | Page 1

heshamzahw's profile

Aerodynamic Simulation on a football to study its pressure and velocity contours

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755
2. Tutorial part 2: https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-2/79155

CFD Professional Training Exercise 4-Tank filling multi-phase

CFD Professional Training Exercise 3- Compressible Turbulent flow through a valve

An improvement study for a VIP latrine design based on optimization between Design and Cost parameters

Aerodynamic Simulation on Louvers with different densities.

Displacement study on two 1/8 spheres using symmetric conditions

Session 3 Analysis Project for the Yaw angle and its Simulation

Static Linear and Nonlinear Analysis of a truck underrun protection

Aerodynamic simulation for an Electric Formula Student car

An aerodynamic study for a Formula Student vehicle

Aerodynamics simulation on an Electric Formula Student Car

This project contains a study of the aerodynamic effect on the plane wings at different angles of attack

Meshing and Thermomechanical simulation on a spherical pressure vessel

Weight is one of the most critical parameters in aircraft design. In this exercise, you will be provided with a baseline design of an aluminum aircraft wing. Your objective is to reduce the weight of the wing without exceeding the yield stress and maximum allowable deflection

Aerodynamic simulation on Louver blades to calculate the pressure drop across them.

CFD Aerodynamics on a Latrine which optimize between the design and cost strategies.

This tutorial studies different meshing options and their effect on the simulation result.

FEA analysis on two brackets with fillet difference

Aerodynamic analysis on front wing Formula student car

Exercise for Session 4 of FEA Professional Training: Dynamic analysis with SimScale. 
To register for professional training, please follow this link: https://www.simscale.com/professional-training/

Convergence analysis for different situations: Notched plate, incompressibility, shear locking during bending

Aerodynamic analysis on an aerofoil of a formula student car

Project for Exercise 3 of FEA Professional training exam. To register for the training, please follow this link: https://www.simscale.com/professional-training/

Aerodynamic study on VIP design, including different drop hole diameters

Thermal professional training - Session 2 - Task B

The project studies the flow around a valve

Stress analysis on a hinge after applying symmetric conditions

CFD Professional Training Homework Exercise 2- Hex-parametric meshing

Handout  for Sports Aerodynamics Workshop: Session 3

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Aerodynamic analysis on VIP Latrine assigning different parameters of the geomtry

Exercise for  Session 1 of Thermal Professional Training: Fundamentals of Thermal Simulations. To register for professional training, please follow this link: https://www.simscale.com/professional-training/

Exercise for Session 3 of Thermal Professional Training: Analysis types based on FEA approach. To register for professional training, please follow this link: https://www.simscale.com/professional-training/

Thermal analysis on a cooling plate for a Formula Student Car.

Public Profile

heshamzahw's profile