SimScale simulation projects by gvaasuthevan | Page 1

gvaasuthevan's profile

Analyse the duct positioning to have effective ventilation system

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows how to simulate the airflow inside an office space.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

Incompressible Fluid Flow analysis of two globe valves

This  project analyzes the aerodynamics of a spoiler

Public Profile

gvaasuthevan's profile