SimScale simulation projects by gustavo_mendes | Page 1

gustavo_mendes's profile

This project consists of the simulation of the car model provided by SimScale, but changing the initial FW by the UC3M design. - Copy

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics. - Copy

Testing effects of results with wing in model yaw or inducing yaw with velocity streams - Copy

Turning simulations used to  estimate aerodynamic forces for VI-Grade vehicle dynamics simulations - Copy

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755
2. Tutorial part 2: https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-2/79155 - Copy

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car - Copy

Public Profile

gustavo_mendes's profile