SimScale simulation projects by gtsoukalas | Page 1

gtsoukalas's profile

Two different designs of an inlet duct are analyzed regarding their aerodynamic performance.

This meshing tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.

Aerodynamics performance of two propellers

Both static and rotating analysis - test sims.

Homework assignment project for the Air-Conditioning and Ventilation webinar session 2.

This project shows how to simulate the airflow inside an office space.

The effect of numerics on the simulation quality and convergence time.

Tutorial: Incompressible turbulent airflow around a spoiler

This project simulates water flow through a double flanged check valve. @Ali_Arafat

This a PERRINN project - for more details go to www.perrinn.com

HPAC webinar project for Blade variation study of a Radial Fan

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for In-compressible Turbulent flow through a cyclone seperator

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows how the cooling of a room can be simulated using SimScale.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

HPAC Webinar-Duct Flow Analysis and Design Optimization

This project shows how SimScale can be used to analyze the fluid flow through valves.

This project simulates incompressible flow through a Venturi Injector

The project illustrates how to simulate airflow around a complex F1 vehicle.

This analysis demonstrates how an airfoil can be analyzed on the SimScale platform.

This project is part of session 1 of the Air Conditioning and Ventilation webinar. It shows how the cooling of a Data center room can be simulated using SimScale.

This project shows an example of how the internal airflow through a suction nozzle  can be analyzed.

In this project static stress analysis of a Toyota Hilux bumper was performed.

Original project of @miguel_angel_a

I'm trying to simulate the comfort factor within an office space during summer time based on different cooling concepts: vanes, big channel, without cooling

Public Profile

gtsoukalas's profile