SimScale simulation projects by gscarborough | Page 1

gscarborough's profile

Create simulation of horizontal launch of X-33 spaceplane. Use properties and initial conditions from models of 737 airliner and swept wing public projects.

Create a new color picture with good image results for X- 33, showing pressure and streamlines. Using compressible flow to analyze horizontal take-off of X-33 that would determine total lift and drag on the vehicle and thereby required thrust.

Goal is to accurately determine the lift to drag ratio when the vehicle takes off horizontally. New Creo 5.0 solid model with large fillets at the root of winglet plus fillets on fudder and all with rounded airfoil tips. Simulating with compressible flow using aerodynamic constants from Airflow around a Commercial Aircraft project.

Run with fine mesh but eliminate force and coefficient calculations, maybe mode solution will converge better.

Make simulation property values like swept wing project

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

gscarborough's profile