SimScale simulation projects by gmldasilva | Page 1

gmldasilva's profile

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Ailerons are not made for liftoff, they help the plane turn. Ailerons are sections of the wing near the tip that can move up and down. This movement can increase or decrease lift. It can also increase or decrease drag. Ailerons work opposite of each other. This means, when one aileron moves up the other will move down. This way the airplane will roll in one direction. For example, when the aileron on the left wing moves up and the aileron on the right wing moves down the airplane will roll left.

Aircraft design project. Half-wing simulation.

Half-wing simulation of my aircraft design project

Wing simulation of aircraft design prototype

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

gmldasilva's profile