SimScale simulation projects by gengtian_topot | Page 1

gengtian_topot's profile

Experimenting with different shapes in supersonic environments - Copy

Simulation about flow through porous medium - Copy

This tutorial contains a thermal comfort project, which analyses the duct positioning inside a theater, in order to have an effective ventilation system. - Copy

This tutorial contains a thermal comfort project, which analyses the duct positioning inside a theater, in order to have an effective ventilation system.

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

This project demonstrates the validity of the CHTv2 and IBM solver. through a Conjugate Heat Transfer (CHT) analysis of a battery pack.
 
Validation Experiment Reference:
A peer-reviewed publication on battery pack thermal validation  has been used as basis for this study (with reasonable assumptions and approximations): 
https://www.mdpi.com/1996-1073/10/8/1157 - Copy

Simple parallel flow heat exchanger using FreeCAD and SimScale. Results show hot stream cooling and cold stream heating up, as expected. This was my first success at getting heat exchanger to work with SimScale. Trick was getting the two fluid volumes extracted correctly. SimScale is so far very encouraging - very easy to use. I will try to post a heat exchanger tutorial. - Copy

Public Profile

gengtian_topot's profile