SimScale simulation projects by gaab82 | Page 1

gaab82's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project includes the shell and tube heat exchanger simulation using the conjugate heat transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature in solids and fluids due to thermal interactions.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Practice with mesh settings. My goal is to make a multi region mesh for the fluid and the pipe volume.

Test run for multiregion mesh
 
Cylinder for inner geometry.

Multiregion mesh test for mini Heat exchanger

Public Profile

gaab82's profile