SimScale simulation projects by fvan_hoorn | Page 1

fvan_hoorn's profile

This tutorial showcases how to use SimScale to run an electromagnetics simulation on a Magnetic Lifting Machine.

F1 Front Wing Geometry for Frontwing Tutorial

Tutorial project for linear static analysis of a crane

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

This tutorial shows how an incompressible turbulent airflow around a Formula Student vehicle moving in a straight line can be simulated.

Conjugate heat transfer simulation tutorial.

Study of CO contamination inside a car park

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Computation of the thermal comfort and flow field inside a car cabin

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

Public Profile

fvan_hoorn's profile