SimScale simulation projects by fer_0507 | Page 1

fer_0507's profile

A turbulent flow simulation of a ball valve is demonstrated in this project.

Tutorial project for linear static analysis of a crane

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows the sliding of a rubber seal on a rigid body due to applied displacement.

In this project a complete assembly of a clamp is analyzed under a static pressure load.

Tutorial for Static stress analysis of Underrun protection device

Burst pressure analysis of a steel 20 lb propane tank.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project, thermostructural analysis of two different designs of spark plug were performed

Public Profile

fer_0507's profile