SimScale simulation projects by fber | Page 1

fber's profile

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project involves the simulation of stress analysis of an aircraft wing. There are total 6 comparison configurations with 3 different models and two different load definition.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project involves the simulation of ventilation in an aircraft cabin. There are 6 comparison configurations with 3 different inlets and 2 outlets.

Comparison of different target-type thrust reverser configurations

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

This project demonstrates the usage of rotating zones

Public Profile

fber's profile