SimScale simulation projects by eulerianial | Page 1

eulerianial's profile

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

Airplane CFD v0.2 modely copied from @jazbin - quick test simulation. Mesh still too coarse.

Going through all the slides of Udemy and testing them.

The air flow around a football is simulated with focus on the effects of the pattern on the football surface.

The air flow around a horizontal axis wind turbine HAWT and the resulting forces on the rotor are simulated.

f 11000
h 290
w 1715

Copied project from @aghakhani to set up a first run.

In this project the eigenfrequencies and the corresponding eigenmodes of a rotor have been computed with SimScale.

drones workshop session 5 with boundary layer

This project contains the geometry of the extruder for the first homework assignment of the 3D Printing workshop.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project contains everything you need to work on your homework assignement

exploring various turbine design and associated thermodynamics

In this project vibration analysis of jet engine is performed.

To explore the lift generation in different geometries

This project simulates convective flow inside a Light Bulb.

Public Profile

eulerianial's profile