SimScale simulation projects by erichards | Page 1

erichards's profile

Nerdy Gurdy 6.1 String Load with full laser relief sides.

Project assumes that the wheel, axle, bearings, crank,  keys, keychest lid, and tuning pegs do not contribute to the rigidity of the instrument.

Analysis including changes from version 6.1 and some minor geometry changes of existing parts to redistribute stress.

Nerdy Gurdy is a community project by Jaap Brand.

Evaluate high stress locations of revision 6. String tension 500 newtons, youngs modulus 13,500 MPa.

Evaluate the stresses in the neck of the Nerdy Gurdy with estimated string tension applied. Using 13500 MPa for the modulus and 500 newtons for the string tension. Key box and sides not included.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Aerofoil to reduce drag behind round strut.

This project shows how to simulate the airflow around a race car.

Public Profile

erichards's profile