SimScale simulation projects by elissaio | Page 1

elissaio's profile

Fiesta 3rd iteration with higher angle of attack at diffuser and strake at side wing

1st test 26-4, with rear s1223 airfoil and front 1010 splitter

No gurney 1.5 of chord length 3 of chord length

Simpler wing  with front of chassis nose and rotating wheel

Endplate with lift wing on side with 3 degrees yaw air trying to imitate tesla valve separation

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Testing how the winglet is distorting the airflow
Testing  meshing quality and k-omega and k-e models for flow separation

250 iterations of k-omega SST to see the effect of tube's new shape at the front endplate

Measure cl/cd and total number of lift and drag while checking for streamlines

Tutorial: Incompressible Turbulent Airflow Around a Spoiler

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

Public Profile

elissaio's profile