SimScale simulation projects by dusan | Page 1

dusan's profile

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

Simulation of a lip wing having  a mounting angle of 20 deg. static condition, for validating research results.

Simulation of a lip wing having  a mounting angle of 10 deg. static condition, for validating research results.

Simulation of a lip wing having  a mounting angle of 30 deg. static condition, for validating research results.

Simulation of a lip wing having  a mounting angle of 50 deg. static condition, for validating research results.

Simulation of a lip wing having  a mounting angle of 40 deg. static condition, for validating research results.

simulation of a ducted fan as a disk imparting momentum. airfoil naca4415, chord 0.3m, 5 degrees

Simulation of a lip wing having  a mounting angle of 60 deg. static condition, for validating research results.

In this exercise, you will complete a laminar pipe flow analysis

Using propeller disk actuator for simulating a channel wing in static condition and compare to experimental results from: https://archive.org/details/NASA_NTRS_Archive_19930087470

Simulating a propeller as a simple actuator disk.
The disk has a momentum added to the flow
The goal is to validate and familiarize with the procedure
Data V0 50ms (abt 100kts flying speed)
VJ 54ms ( calculated for 186hp power, giving  2778N)

simulation of a ducted fan as a disk imparting momentum. airfoil naca4415, chord 0.5m, 10 degrees

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Exercise: Aerodynamics of a Radio-Controlled Plane

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

Incompressible Fluid Flow analysis of two globe valves

Public Profile

dusan's profile