SimScale simulation projects by duraisamy | Page 1

duraisamy's profile

This project shows the plastic deformation of a Crane hook.

In this project drop of a drone on a rigid plate was simulated.

Original project of @rszoeke

In this project thermal analysis of a Laser beam welding was demonstrated.

Copy of the project Biegeversuch by @aniossa

In this project a frequency analysis of a disc brake is demonstrated.

This project performs an uncoupled thermomechanical analysis of a fixed beam under changing temperature.

A casing of a mobile phone is tested when being dropped from 2 meters height.

This project conducts an acoustics frequency analysis of a rectangular cavity.

This project shows the sliding of a rubber seal on a rigid body due to applied displacement.

This example simulation shows the acoustic eigenfrequencies of a car cabin cavity and the corresponding bounding box.

This nonlinear static analysis shows the sliding of a rubber seal on a rigid body due to applied displacement.

In this project tension, torsional and bending load tests of a hyperelastic rubber bellow is performed.

In this project a dynamic structural analysis of gears in contact is demonstrated.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows the thermo-structural analysis of a pressure vessel with temperature-dependent material properties.

Hyperelastic Combination of steel and rubber

This project demonstrate the drop test of a plastic bottle using first and second order mesh.

Public Profile

duraisamy's profile