SimScale simulation projects by dschroeder | Page 1

dschroeder's profile

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

Testing front wing / Nose / Radiator in diffuser

Testing to help with 2021 aero package development

Testing effects of results with wing in model yaw or inducing yaw with velocity streams

half car tests to determine mesh independence

Turning simulations used to  estimate aerodynamic forces for VI-Grade vehicle dynamics simulations

Turning simulations used to  estimate aerodynamic forces for VI-Grade vehicle dynamics simulations - 7 Meter

Dynamic model with aero kit to determine mesh acceptance

Dynamic model without aero kit to determine mesh acceptance

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755
2. Tutorial part 2: https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-2/79155

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

For step by step tutorial see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878
2. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-2/79350

Tutorial: Incompressible turbulent airflow around a spoiler

Public Profile

dschroeder's profile