SimScale simulation projects by dperkins | Page 1

dperkins's profile

In this project, a thermal shock analysis of a globe valve is performed.

In this project a thermal analysis of a laser beam welding (LBW) was performed.

This nonlinear static analysis shows the sliding of a rubber seal on a rigid body due to applied displacement.

Strength analysis of excavator arm during various loading scenarios.

In this project a static analysis of a crankshaft-piston-rod assembly is demonstrated.

This project simulates opening of a pressure relief valve using 6 DOF body motion.

This project demonstrates a static simulation of a car rim under a distributed load.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows the nonlinear static analysis of a car suspension.

A contact analysis of a consumer snap fit mechanism is analyzed in this project.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

dperkins's profile