SimScale simulation projects by dnizar | Page 1

dnizar's profile

This project simulates turbulent flow through a straight circular pipe.  Two turbulence models were used: kEpsilon and kOmegaSST. Simulation results from  were validated using corresponding analytical expressions. - Copy

Examination of a developing flow through a pipe - Copy

This project simulates turbulent flow through a straight circular pipe. - Copy

The aim of this project is to calculate the pressure drop in turbulent flow through a straight smooth pipe. Airflow inside a smooth pipe, which has 4 mm of diameter and 2 m length, was simulated for 50, 40, 30, 20, and 10 m/s inlet velocities.  Incompressible steady-state flow analysis with k-omega SST turbulence conditions is considered for the flow. The results from the CFD study are compared with those from an analytical study for validation purpose. It was noted that using SimScale even with automatic meshing as well as solver settings, high accuracy can be achieved. - Copy

simulation of pressure drop through the pipe lyre - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

dnizar's profile