SimScale simulation projects by dhcho | Page 1

dhcho's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

This project simulates Couette flow - flow in annulus fixed-rotating cylinder pair.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for Heat transfer in a heat-sink

Tutorial: Incompressible turbulent airflow around a spoiler

This project simulates incompressible non-newtonian flow through a sudden expansion.

Tutorial for In-compressible Turbulent flow through a cyclone seperator

Tutorial for meshing of valve geometry with Snappy Hex Mesh

This project performs a quasi-static compression analysis of a steel punch on an aluminium cylinder.

Public Profile

dhcho's profile