SimScale simulation projects by demo2 | Page 1

demo2's profile

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for Static stress analysis of Underrun protection device

Tutorial project for linear static analysis of a crane

This tutorial shows how to analyze the Heat transfer in a heat sink.Tutorial Project

This tutorial analyzes the flow behavior inside a cyclone separator

Harmonic FEA analysis on the geometry created by CAESES

This project demonstrates the usage of rotating zones

Tutorial project for setting up a Multi-phase flow simulation

Simulations comparing 2 variants of fans and the flows

partitioned CAD model-3D printer assembly

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

This project shows the transient thermal analysis of a car braking system.

Thermal professional training - Session 2 - Task B

Public Profile

demo2's profile