SimScale simulation projects by davidps99 | Page 1

davidps99's profile

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755
2. Tutorial part 2: https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-2/79155

Using the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm,
inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s.
Doing this problem with two different fluids: water and aire.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

davidps99's profile