SimScale simulation projects by david_knight | Page 1

david_knight's profile

HT05 25 degree angle 1.5 inch ride height

HT05 15 degree rake 1.5 inch ride height undertray

HT05 with a raised chassis and no undertray. Contrast this simulation with future undertray simulations

HT05 ride height and rake angle undertray variation

HT05 Raised Chassis (10mm) with undertray addition. Very basic undertray design, iteration 1

HT05 simulation at 10 degrees rake and 1.5 inch ride height

HT05 simplified geometry with wings, chassis raised in preparation for undertray addition. CFD simulation intended to show the difference between HT05 with and without an undertray.

Computational fluid dynamics aerodynamic simulation of HT05

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

david_knight's profile