SimScale simulation projects by daniel_mckee | Page 1

daniel_mckee's profile

Test Thickness of Glass for Tall Water Tank

Steady state simulation of a heat source in a box

Project Aims to determine  the Velocity patterns that form if a Linear diffuser is  directly fed from from a duct without a plenum

Analysis of in-compressible flow in various geometries with different type of boundary conditions

FEA for forces on 1.6mm sheet metal plate

Comparing outlet restriction effect on distribution of flow rate

350mm Bracket constructed from flat bar and rect tube

Load Strength of Flat bar profile brackets

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

daniel_mckee's profile