SimScale simulation projects by daniel11 | Page 1

daniel11's profile

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

Collecting data on wing for optimise in TS Inspire

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project a static analysis of a shaft under a torque load is demonstrated.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tablet folding Handle - check stress and strain

Rod Crank Gear Mechanism
Is to learn the contacts definition

Learn dynamic forces with wheel and spring

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

In this project, a linear stress analysis of scooter frame is made for a 70 kg person by using simscale workbench. A simplified Cad model of a scooter is used for the analysis which was prepared by me using CATIA in accordance withe real dimensions. The material of the scooter is chosen as 7075 aluminium alloy.

Copy from  Project supporto-uta - Supporto unità trattamento aria from Daniele

Public Profile

daniel11's profile