SimScale simulation projects by cthangam | Page 1

cthangam's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for setting up a Multi-phase flow simulation

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

This project deals with the flow of water in the backward facing step for steady-state condition. The turbulence created is resolved using k-epsilon turbulence model. The separation of the fluid due to turbulence and pressure drop are observed in the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for Static stress analysis of Underrun protection device

In this project the flow of air through two inlets under steady state condition are studied.The turbulence created inside the injector are solved using K-Omega model.The behaviour of velocity of the fluid and pressure drop are also observed during the simulation.

Public Profile

cthangam's profile