SimScale simulation projects by conklech | Page 1

conklech's profile

Aquarium flow simulation with bottom diffuser

Use a model to determine why my own models don't get boundary layers generated

Evaluate dimensions, geometry, and flow rates for a Rex Griggs style reactor to dissolve CO2 in water. Dissolution is not simulated. Rather, evaluation criteria include mixing and flow velocity to reduce bubbles in outflow

Tutorial for meshing of valve geometry with Snappy Hex Mesh

Simplified test case of a right-angle diffuser for low-velocity water

Integration test of 29 gallon aquarium with diffuse return and overflow on top

Experimentation with flow patterns in a 100-gallon aquarium

General flow patterns in 29 gallon aquarium

Attempt to provide laminar flow in an aquarium diffuser.

This project simulates laminar flow through a straight circular pipe.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

conklech's profile