SimScale simulation projects by cleat | Page 1

cleat's profile

CFD model compressible flow choked nozzle

a simple venturi throat, incompressible model

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

calculate deflection for a 20mm SHS steel tube, 1m long, simply supported at each end under gravity

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

cleat's profile