SimScale simulation projects by clamotte | Page 1

clamotte's profile

Tutorial project for linear static analysis of a crane

Looking at air flow through perferated plate at different CFM

The effect of numerics on the simulation quality and convergence time.

Examine the different lift of two different blade designs

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

determine the amount of deflection of a 1 inch dia stainless steel shaft with 1040 lbs of force applied evenly across the length of the shaft and held at each end

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Public Profile

clamotte's profile