SimScale simulation projects by chuckwilcox123 | Page 1

chuckwilcox123's profile

Trying to get compressible large propeller flows to work

Large prop, trying compressible sim again...

Review of mesh setup to improve meshing :0

Testing optimal shape & attack angle to maximise CL/CD for Ch10 airfoil, Incompressible.

Systematic foil testing as AOA changes & other parameters are changed

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Ch10 foil segment at various Angles of Attack tested for lift & drag within a straight walled duct

Testing to see very close outer ring impact drag on propeller

Tutorial on MRF incompressible rotating zones

Test of modified Duct Leading and Trailing edge

Determine leading edge of the duct thrust contribution

Using Simscale AOA inlet airflow on CH10Airfoil

Airfoil Ch10Sm @  various angles of attack measuring drag, flow separation and flow separation reduction from vortex generators, such as dimples or rods to reduce flow separation and drag

Looking to achieve a smooth airfoil from a csv file imported into Fusion 360 and transfer into STL format, so I get a smooth model in Simscale, as the delete feature in the Flow region cannot create a smooth surface

Airfoil lift & drag determination & side wall frictional resistance

Examining side airfoil wall shear forces generated from adjacent moving wall

Public Profile

chuckwilcox123's profile