SimScale simulation projects by chandbasha | Page 1

chandbasha's profile

Tutorial: Incompressible turbulent airflow around a spoiler

Testing the deflection of L Angled Steel bar.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for Static stress analysis of Underrun protection device

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

This project is the starting point for the homework for Session 1  of  the Baja SAE workshop. It enables the user to analyse the plastic deformation in an All Terrain  Vehicle (ATV)  Suspension .

Drop Testing of an iPhone6 With and Without a Cover

This is used as a starting point for the SimScale Users and participants of the Session  2 of the All-Terrain Vehicle Design Workshop

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Public Profile

chandbasha's profile