Thermomechanical

This analysis type is used to determine the structural and thermal stress of a solid object subjected to thermal and structural loads. First the temperature field is solved and then applied as a load for the structural analysis. | Page 14

In this project, a thermal shock analysis of a globe valve is performed along with a flow analysis and a structural analysis

Thermal Mechanical Analysis was carried on the HPT blade designed in DS Solidworks 2017. The loads were applied in 2 sections namely, (i) Mechanical loads in the form of centrifugal force and surface pressure on the leading edge of the blade, and (ii) thermal loads in the form of surface and convective heat flux. The support was kept as elastic to account for the micro displacements occurring due to extremely high temperatures of combustion gases inside of the gas generator of the engine.

Project designed to study the plastic behavior of steel bars subjected to bending (CA50, ASTM 4140 steel bars used in civil construction). A non-linear static analysis will be used for this simulation. Steel deformation data were taken from a university article presented at a congress.

Heat conduction of an AOM to the optical table

A multi-physics analysis of a turbcharger

Heat transfer simulation of nozzle (version B3-V9)

Thermomechanical | SimScale Project Library | Page 14