Find all public projects containing STL CAD models here. | Page 166

vvVvVvV - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy

Simulate an arrow rotating through the air

This project simulates water flow through a Gate valve by using the Incompressible flow simulation type. Main purpose of the project is to obtain the forces acting on the half-open valve and flow pattern through the pipe as it crosses the valve section. - Copy

ujyhgtrfedw - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy

The simulation will use 3d models of sharp edge delta wings that have plate airfoils. The root chord of each delta wing will be the same length, and the same quarter-root chord line. All the airfoil will be set at an angle of attack of 12°. For the models that were created a root chord of 100 units was chosen and the quarter- root chord line started at 75 units from the trailing edge.

STL | SimScale Project Library | Page 166