Static

This analysis type is used to determine the displacements and stresses in structures or components caused by the applied constraints and steady loads - inertia and damping effects are ignored. A Static analysis can be either linear or nonlinear.  | Page 79

Main Fuel Valve actuator enclosure for Flight Vehicle feed system

holder with fillet, to test stress concentration on sharp edges

Analisis de un cilindro de acero bajo a compresion

Template for the convergence study course in Coursera - Copy - Copy - Copy

el objetivo es analisar una protesis para poder ahondar en un laboratorio de clase, la simulacion es de simscale

Barra rectangular de acero bajo una carga perpendicular que da una flexion negativa

Coursera - Mesh Convergence Training Template - Copy

Learning the concept of mesh convergence - Copy

see what forces the leg can take before brakeing - Copy

Analysis of a lightweight racecar brake pedal for Five Flute engineering guide. - Copy

spool holder gets tested before its printed

Static | SimScale Project Library | Page 79