Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 58

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Free Floating Strucutre submited to wave motion

This project demonstrates a multiphase flow simulation of a sluice box.
If i manage it...

Multiphase CFD simulation of a micofluidic T-Mixer

This project simulates the free movement of floating boat under a wave using 6 DOF motion.

simulations of fluid drops  falling (gravity effect)

Filling of a bavarian maßkrug with beer. Interesting factors being: The filling angle (influencing foam development) and the inlet velocity

solution of acidic gasses in basic liquid solvent

An analysis of a Land Rover Defenders fuel tank on cornish roads :)

Multiphase Flow in a Cubic Region with a Sphere Inside

Drop deformation by gravity forces moving through  a constricted tube. The geometry was taken from a public project.

-find accurate settings
-show the kelvin-helmholtz instability (source: https://de.wikipedia.org/wiki/Kelvin-Helmholtz-Instabilität)

Simulate free water inflow to to closed cage system

This simulation models the behavior of sea waves around a frigate.

modification of a public project including one second bubble of a different size.

In this project a multiphase flow simulation of a stirred reactor is demonstrated.

Multiphase | SimScale Project Library | Page 58