Heat Transfer

This analysis type is used to determine the temperature distribution and heat flux in a solid body. You can choose from several boundary conditions for temperature and heat flux to model the thermal loads in your system. | Page 147

See temperature distribution _see if it is off centre

oowweee sdjnoiadnjfkjasmd cxmakld  csakdma

Thermal analysis with 5mm aluminium plate on both sides.

40mm heat cartridge 35mm spread instead of the 30mm

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Heat cartridges at 20mm height  from the bottom

Heat analysis of electronics in enclosure

Thermal distribution of Lower heating block

10mm Heat Cartridge from bottom and 33mm spacing

Heat Transfer | SimScale Project Library | Page 147