Dynamic

This analysis type enables the time-dependent calculation of displacements and stresses in one or more solid bodies. In contrast to a static analysis, in a dynamic analysis phenomena like inertia forces and damping effects can be represented. | Page 96

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

In this project, a dynamic nonlinear impact analysis of a human skull with and without helmet is performed.

Differential mount of a formula student car. The goal is to reduce the weight.

Impact of 2J on device simulated by drop of the 0.5 kg weight from 0.4 m

mechanical simulation of non lineare pressure load

Dynamic 2D structural analysis of a formula student differential mount.
The part is sitting on a vibrating system between the engine and the differential. The part needs to be optimized for minimum weight.

An aluminum Pipe hitting a steel solid column.

Testing the structural integrity of a gearbox

Suspend extruder with 6 strings, being 3 pairs with each pair being in vertical plane

A model of a steel chain link is put on stress testing, provided the both ends are loaded . This test is a conceptual inspiration from cycle chains , it is that once the rider pedals his cycle each chain links undegoes a load distribution on them from pedals through socket on to the chain links and to the rear gear. The idea is simple and fun.

wall
1020 steel
and
the particle 
Velocity : 50 ms
Diameter 120   micrometer

FEA Master Class Session 3 HW: In this project the drop test of an iPhone 6 has been performed with and without case.

A dynamic analysis project to demonstrate the positive influence of adding a covering case on an iPhone 6.

Test to see how much stress is transferred into the ceramic part of a feedthrough.

How changing the weight of the battery and the motor affect during an accidental drop.

Drop Test of torpedo in seawater. Torpedo hits sea floor at 500 ft

Dynamic | SimScale Project Library | Page 96