Convective Heat Transfer

This analysis type is used when temperature changes in the fluid lead to density variations and movement of the fluid due to gravity. This solver can be used for natural convection but also for forced convection, when flow motion is induced by external forces, such as inlets, pumps or fans. | Page 12

Convective Flow inside a Light Bulb is simulated.

Key Results:

1. Temperature distribution inside the light bulb

2. Behavior of flow due to convection - Copy

Study of a possible ventilation solution for a room without windows.
Studying the air flow with the fans turned on (incompressible), and with them turned off (convective heat transfer).
There are 3 bottom holes with inlet fans (that communicates between outside and inside high floor), 1 pipe inside the high floor (that connects one of these bottom holes with the room) that  contains a fan inside, 1 pipe inside the room (that connects the inside of high floor with the room) with an inlet fan at the bottom, 1 door bottom hole (that communicates between outside and the room) with an inlet fan and 1 door top hole (that communicates between the room and outside) with an outlet fan.

Thermal Comfort Analysis of an Tambour diffusers
Key Results:
1. Predicted Mean Vote
2. Percentage of People Dissatisfied - Copy - Copy - Copy - Copy - Copy - Copy

To calculate heat distribution across the room and optimal room configuration for inverters

Xavier Franco i Boixeda, Pau Cuadras Yetor

Using convective heat transfer analysis to evaluate the cooling system of a data center. Different scenarios will be assessed. - Copy

Ceiling has been fit to the top to make as single volume

Convective Heat Transfer | SimScale Project Library | Page 12