Compressible

Find projects using the compressible analysis type here. | Page 208

Design a nozzle, with a 10 cm length, outlet orifice 10 mm, inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s.

Comparing the four different Spectre designs we have

Flow study of a 3d printable water rocket prototype

Using the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm,
inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s.
Doing this problem with two different fluids: water and aire.

Flow analysis of a centrifugal flow gas turbine engine prototype

The goal is to simulate multiple wings for  a project, and evaluate which is the most suitable.

test for compressible solver for flow in nozzle

HPAC webinar project for Blade variation study of a Radial Fan is presented. Two design configurations for the Radial Fan is chosen, and both configurations are simulated in three different operating conditions. Main purpose of the project is to assess the pressure rise within each configuration and consequently compare flow coefficients.

Aim is to look at the mixing in a channel flow

Simulation of rocket engine with solid propellant as part of my PhD thesis.

Compressible | SimScale Project Library | Page 208