SimScale simulation projects by butter_tttt | Page 1

butter_tttt's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Aero-analysis of a Single Engine Trainer Jet - Copy

finally compleated the tesla model 3 model - Copy

Aerodynamic analysis of a fictional single seater race car with different aerodynamic packages.
Notice the upper middle face of the front wing was deleted for causing errors - Copy

Aerodynamic analysis of a track-focused road car - Copy

Aerodynamic analysis of a rushed race car - Copy

Retro-inspired supercar aerodynamics - Copy

CFD of a Race Car design by myself - Copy

Aerodynamic Analysis of an F1 Rear Wing - Copy

Aerodynamic Analysis of an F1 Front Wing - Copy

This project involves meshing externally a Boeing 777-200 LR Aircraft, and then simulating its' operation on flight facing an airflow with an axial velocity of 50 m/s.  It is one of the longest-range commercial airliners, with an exterior length and wingspan reaching 63.70 and 64.80 meters respectively.  For this case a model with removed engines was chosen in order to assist convergence and meshing. Also a Symmetry plane was added midst the Part, and half the part was used for meshing and simulation for simplification.  A steady state compressible flow simulation is executed to visualize the air flow around the bodywork and wings of the aircraft, as well as the pressure distribution while on flight. - Copy

We will see what are the aerodynamics fluids which are influancing a F1 car. - Copy

Investigate the aerodynamic and cd of a car

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

butter_tttt's profile