SimScale simulation projects by bemism | Page 1

bemism's profile

Conjugate heat transfer simulation tutorial.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

This project validates distributed pressure and nodal stresses for a thick plate under pressure load.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Investigating the impact of numerical settings.

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Copied centrifugal pump from a SimScale webinar.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Airflow over a car simulated with an Ahmed body.

The effect of numerics on the simulation quality and convergence time.

Exercise 3: Multiphase Flow and the Courant Number

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Public Profile

bemism's profile