SimScale simulation projects by belmartechie | Page 1

belmartechie's profile

analyzing the flow around my badly built boat rudder

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

learning to use simscale. doing a pressure simulation of a 5 gallon water bottle to compare the results with my ansys/solidworks homework. This is an axisymmetric analysis. The wedge is a 90 degree slice of the full model.

just testing something.... no practical use.

NOTICE: I can't run solidworks on my computer (it's a Linux machine) and I couldn't get that .igs file fixed properly in freeCAD. So please convert the geometry which you fixed yourselves to .stp and use that for your simulation. The one i used here is another hull and propeller I downloaded off the net just to show you how to do the homework with Simscale. If you use the same simulation settings we showed in class but the results you get here differ, it's probably because of the different mesh. If you have any problems, contact me.

Public Profile

belmartechie's profile