SimScale simulation projects by behera_rabindra | Page 1

behera_rabindra's profile

This project conducts a dynamic analysis of a pinned bar under gravitational load

This is the current wheel used on Cruzee. The material is Polypropylene and meets all structural needs. This simulation compares the normal wheel to a lighter wheel with fewer spokes and an improved spoke section. It is therefore tested that will it maintain the same level of stiffness radially and laterally while reducing weight.

In this project a static analysis of a beam und a gravitational load is demonstrated.

This project shows the dynamic response of a damped spring mount system after the applied pressure is released.

This project simulates the response of a paving stone subjected to harmonic pressure.

This project shows the stress analysis of a hip joint prosthesis.

Copy of project cylinder-test1 - stress test of torr segments by @rotteman

In this project a dynamic structural analysis of gears in contact is demonstrated.

How the stress devloped while the punching operation is subjected.

This project performs an uncoupled thermomechanical analysis of a fixed beam under changing temperature.

In this validation project, a dynamic nonlinear impact analysis of an elastoplastic bar is demonstrated.

This project shows the steady-state thermal analysis of a heat sink.

This project shows the thermo-structural analysis of a 8 pin Small Outline Integrated Circuit (SOIC) chip with applied heat flux on the main chip core surfaces.

Public Profile

behera_rabindra's profile