SimScale simulation projects by bcoman | Page 1

bcoman's profile

Is it possible to we simulate vacuum dirigible

Curious about pressure distribution inside rotating shapes

Simulate compressible fluid inside rotating drum

Tutorial Hex-dominant Parametric for rotating geometries MRF
Copies from user retsam.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Source for this tutorial https://www.simscale.com/forum/t/step-by-step-tutorial-for-conjugate-heat-transfer-cht-webinar/25258

Looking to simulate a rotating solar collector as summarized here... https://tinyurl.com/rotatingsolar1
with more detail in the original thesis...
https://www.builditsolar.com/Experimental/RSB/The_RSB.pdf

How is pressure distribution inside rotating disc.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

Curious about how radial pressure within rotating drum.

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

bcoman's profile