SimScale simulation projects by bbdaqui | Page 1

bbdaqui's profile

Cover is offset by 0.005 meter, 2 snaps, 
Assumptions : Symmetric on both planes.
Only a quarter portion of enclosure is analysed. - Copy

Similar case to LBM of project 3 but includes some modifications (e.g, holes in the PCB). The LBM may have a filler resin

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

bbdaqui's profile